Choosing a right pharmaceutical packaging is very critical as well as necessary decision for safe ingestion of the medicinal products. Blister packaging supplier need to think beyond choosing a pack that looks good, after all ultimate motive of the product is to provide consumer safety while ingestion of product.
With blister packing it is easier to open medicine, count doses, protect from theft and resist from natural external elements. To make it more feasible it is important that a right type of blister packaging is chosen that works best for medicinal product. Type of product is also another major factor that determines the choice. Mainly blister packaging is categorized as – cold formable and thermoformable. Both of them have been classified as per the material they use.
Cold-formable: In this type of packaging products are packed with pressed aluminium to create a case for tablets/capsules which then laminated with plastic as a base. Though aluminum is resistant to many external elements and also possesses high mechanical resistance, but in contrast this metal is has a tendency to deform other materials and create cracks. However including plastic together with aluminium adjusts this problem. This type of pack is opaque, hence is ideal for product that has needs to be protected from light.
Thermoformable: For this packaging thermoformable packaging is used which can be turned into any shape, although they do not provide as much resistance to the external elements (like light) as cold-formable pack since they are transparent. For a product that need not much protection from light, it can be an ideal selection as it offers wide possibility of creating unique shape plus to show off the product.
These blister packs not only provide a barrier but also help in protecting the shelf life of these products. This type of packaging offers a certain amount of tamper resistance. In the US, all physician samples and over-the-counter drugs use blister packaging. The blister pack is also better known as the Push-Through-Pack in some certain countries across the world. Blister packaging ensures some degree of authenticity and integrity of the product.
Choice of material for blister pharmaceutical packaging is entirely dependent on the sensitivity of product from external elements like light, air, heat and moisture. Since every pharmaceutical product has individual degree of resistance, the type of storage and material are selected only after thorough tests and considering several factors. There are different categories and sub-categories of Blister packaging supplier, which are chosen as per their suitability with the product.
The main advantage of this type of packaging is the extended shelf life, due to protection against oxygen and humidity that it provides for these medicinal tablets and capsules, compared to conventional packaging in bottles and containers. With blister packaging, the tablet or capsule does not get exposed to external air and humidity until such time that the aluminium foil is broken. The aluminium foil is not supposed to be broken until just prior to the user ingesting the tablet or capsule.
In the case of conventional bottles and containers, all of the tablets or capsules inside that bottle or container are exposed to external air and humidity every time that the cap is taken off in order to take out just one of these tablets or capsules. This is the reason why when opening a food supplement or vitamin stored in a conventional bottle there is a smell that means that many of the ingredients that were in the capsule or tablet is being lost. In some cases because of the oxygen and humidity, the ingredients change their chemical form. This does not happen when buying food supplements in blister form because the tablets and capsules are protected from oxygen and humidity.
The second advantage of blister packs is the convenience to the user of being able to carry around in his or her pocket or handbag just one flat and light blister card of tablets instead of having to carry the whole bulky and heavy bottle. The need to carry tablets on one's person applies to many tablets, such as headache, anti-histamine, contraceptive, antacid, anti-inflammatory and heart tablets etc.
A blister pack is one of the more common types of retail product packaging, and we design these for hundreds of different clients each year. Often, a blister pack will include a paperboard backing or perhaps a seal of aluminum foil or perhaps very thin plastic. Blister packs can be used to package millions of products, including medicines, pens and pencils, scissors, tools, toys, batteries, glue sticks and much more.
When a Blister packaging supplier adds a foot to their existing packaging, they improve the opportunity to gain freestanding shelf and counter space. A foot at the bottom of a package allows a portion of the plastic to serve as a base. Many retailers will provide opportunities with more visibility for products that sit on shelves or counters instead of hanging on hooks or lying in bins.
Customers are increasingly sensitive to how products they use impact the environment. In fact, many companies now provide preferences to vendors using eco-sensitive packaging. Manufacturers can specify the use of more environmentally sensitive packaging, such as blister packaging composed of PET materials versus traditional PVC. Efforts to reduce total use of materials and more effective packaging can reduce costs and produce environmental benefits.
Many companies choose clamshells and other blister packaging to provide protection from theft and pilfering. However, the same package has the capabilities to better showcase a product or provide space for highlighting its features. The density of packaging can be increased or decreased to provide greater protection if problems are encountered in the distribution and retailing environment. An example of this creative use is forming packaging around fragile headphones or ear buds, rather than using a box form or standard clamshell.
We can design clamshell packaging for any just about any product from any industry. Our clients include those from the food industry, retail industry, pharmaceutical industry, agricultural industry and electronics industry. Contact us today and we will begin with a consultation to determine what type of clamshell packaging will work best for you.
Blister packaging is a form of plastic packaging and is used in the pharmaceutical as well as the consumer goods industry. The blister packaging machine is increasingly used in these areas and there are many types of blister packaging that are available in the market.
In the pharmaceutical industry, the blister packaging machine is used as unit-dose packaging. Tablets, lozenges, and capsules are packed using the unit-dose packaging system. These Blister packaging supplier not only provide a barrier but also help in protecting the shelf life of these products. This type of packaging offers a certain amount of tamper resistance. In the US, all physician samples and over-the-counter drugs use blister packaging. The blister pack is also better known as the Push-Through-Pack in some certain countries across the world. Blister packaging ensures some degree of authenticity and integrity of the product.
The blister packaging machine is also used extensively in the consumer goods industry. This type of packaging is used in many consumer goods like toys, pens, electrical and electronic goods, hardware, and many other products. This type of packaging is very useful as the consumer can clearly see what is inside and look at the product without having to open it or tamper with it. It is sealed at the manufacturing unit and hence remains tamperproof. A vacuum formed plastic shell is placed around the mold and hence the product can snugly fit into the packaging.
The other form of packaging is known as the clamshell, which is a more secure packaging system. This is especially useful in the packaging of electronic items. This consists of 2 pre-formed plastic sheets that are fused together at the edges. This is designed in such a way to discourage tampering and this is an excellent way to package an item and prevent duplication.
The blister packaging machine has many uses in all these areas of manufacturing and it ensures that the products are tamper-proof to some extent. There are various methods that are used during the manufacturing such as cold forming and thermoforming. Even the materials used in blister packaging can vary.
Choice of material for blister pharmaceutical packaging is entirely dependent on the sensitivity of product from external elements like light, air, heat and moisture. Since every pharmaceutical product has individual degree of resistance, the type of storage and material are selected only after thorough tests and considering several factors. Those tests are performed during the stability studies, so as to identify which material is suitable for them. There are different categories and sub-categories of blister pharmaceutical packaging material, which are chosen as per their suitability with the product.
Reluctance to change: Change is difficult in any organization, and if the customer's views are not taken into consideration, then nothing changes. Also sterile packaged medical devices are expensive to validate making it the major factor contributing to resistance to change.
Sustainability is a huge driving force: In packaging medical devices and pharmaceuticals, it is important to be realistic about packaging expectations. Customers generally require high-barrier materials to meet their need to protect the product from oxygen, moisture, and light. The material in these packages is expected to have a shelf life of more than five years.
Cost Saving: Financial cost is considered to be among the major drivers for change in packaging, If it is reducing materials or looking at cheaper vendors, it is always because Blister packaging supplier is looking to save money and to be more environmentally friendly.
Patient Safety: In medical device packaging, the end user i.e. the patient is starting to have a much louder and prominent voice. This has an impact on sustainability, supply chain, and use of the product. There is a greater scope in device packaging for advancements than there is in pharma.
The clear plastic blister packaging is most often combined with a printed card which has a heat-seal coating so the plastic blister can adhere to the card. Sometimes in place of the printed card, foil, plastic or laminated materials are bonded to the pre-formed blister. If this style of package were tampered with, it would be obvious thus the blister package is a very popular style when a product must remain secure for the end user.
With over 20 years of providing customers with the most current and relevant Blister packaging supplier, our staff will coordinate every step of the process in order to make sure that your product has the right features to succeed at retail. We are a “quick-turnaround” expert so do not be concerned about tight deadlines.
We take pride in providing the perfect, most cost effective product packaging solution every time. A blister package is one of the most popular methods to retail a product because it is visible behind a glossy covering, and gives the consumer full view of your product while protecting it from dirt, moisture and theft.
Blister Packaging options include: Face seal blister – A custom thermoformed PVC blister is heat sealed to the front of a blister card
Trap blister – Where a the flange of the thermoformed blister is “trapped” between a front and a back blister card
2 piece blister – This is also referred to as a clamshell package where there is a front blister that matches up with a rear blister capturing a graphic card and your product in-between them.
Combination clamshell and blister – This is a hinged clamshell that encapsulates your product and then snaps closed, but it has a flange around the perimeter of the clamshell that allows it to be heat sealed to a blister card.
Timelines and lead-times. Once you have selected a card size and your artwork is completed, we will need a “production” sample of each of the products that will go into the blister package, and we can begin custom designing and prototyping the PVC blister for sign-off. Once we have artwork, we can have your complete project blister sealed and pack-out in 4 weeks or less.
Blister packaging - You might not be familiar with the name, but you’ve surely seen blister packs on store shelves. Blister packs are a type of plastic packaging commonly used for different consumer and pharmaceutical goods; a “blister” is a plastic shell that was thermoformed or plastic molded, then it is adhered to a paperboard or foil—blisters can also be bonded alone, which are called clamshell enclosures.
Blister packaging supplier protect products against varying environmental changes and shipping damage—while providing aesthetic value. Blister packs are often paired with custom designs to entice passersby.
Advantages of Blister Packs 1. Product protection. As mentioned, blister packs act as a barrier between your product and outside elements. The weather isn’t the only thing capable of damaging your product; before getting into the hands of consumers, products can experience all kinds of impact or possible contamination.
2. Evidence of tampering. Products are individually sealed in blister packs, and the packs are designed to be torn in order to reach the product inside. Some blister packaging uses tamper-proof mechanisms and due to this, blister packs can quickly and easily inform consumers if their product has been mishandled or previously opened.
3. Versatility of Use. Blister packs can also be child resistant—these packs use a paper or film layer with a peelable adhesive that must be removed before reaching a product. Some blister packs, such as those made with 15-mil polyvinyl chloride, provide another layer of protection to products; blister packs made of harder substances with bitter-tasting coatings help deter children from chewing on them.
Blister packs are designed for high-speed production and high versatility. Blister packs are useful in various applications, and are often the most cost-effective, aesthetically pleasing, and safest option to package different products.
Blister packaging is a very flexible type of custom packaging. Many industries need blister packaging, and this type of custom packaging is used for a variety of product categories. Tools and hardware often are placed in blister packaging, as well as a huge variety of household goods, toys, games, office supplies, cosmetics, electronics and much more. At HLPKlearfold, we can create custom blister packaging in virtually any size or shape.
Best of all, you don’t have to completely re-design your product packaging and spend countless hours or thousands of dollars on it. The easiest and fastest way to start is by making small, simple changes. You can choose to use blister packaging options that replace traditional materials with more environmentally friendly ones that are renewable, sustainably sourced, or recyclable.
By their very design, blister packs are meant to give the consumer maximum visibility of your product. A thermoformed plastic capsule encases and surrounds your product, so customers can see exactly what they’re getting before they make their purchase. Nothing is hidden away in a box or carton, and no fillers or other packaging material has to be removed. When it comes to capturing eyeballs and increasing shelf appeal, this packaging method is a terrific choice.
Blister packs are already a favorite with pharmaceutical companies, and for good reason. When medications are offered in a blister pack, they are hermetically sealed and kept safe from moisture, contamination, and humidity. For these reasons, many foods are now offered in blister packs. Choosing to offer foods in blister packs has the added advantage of protecting those items from spoilage.
It’s easy to see how blister packs can help reduce a company’s total packaging costs. There’s simply less packaging involved! Less packaging means fewer materials are consumed to produce the packaging, and that translates to significant savings for manufacturers.
Blister packaging can be created using a variety of different types of thermoplastics. If you are need custom Blister packaging, please visit our website, we are the world's largest Blister packaging supplier.
Blister packaging supplier provides a new form of packaging that can allow the consumer to get a good look at the product, while at the same time it protects the product from minor damages and dirt. This type of packaging is available in different sizes and shapes. To get a more custom look it is possible for a manufacturer to add color, and the company's logo to the design package.
Clamshell packaging has surpassed these older forms of product protection. In this new type, a molded plastic form is used to cover and enclose the product completely from dust, moisture, and dents as the package moves from one location to another and through various temperatures and climates while in transit.
This new type of product protection is an advance over the older blister form of packaging and gives a more advanced protection for newly manufactured products. The consumer products that are normally used for such product protection are headsets, mp3 players, mobile DVD players and many other electronic gadgets. Products such as these need the extra protection from moisture that can build up in transit from supplier to consumer. Clamshell packaging is not like the products seen in the supermarket that are used to contain perishable foods; instead it is made of a strong durable plastic that has been molded to fit the shape of the product being shipped.
The airtight fit of these help prevent molds for growing inside and damaging the product while it is being shipped. These clamshell packages can now be custom made from select manufacturers so as to provide a must better look and fit and to match exactly the size and shape of the product to be shipped.
Clamshell packaging has now become very popular with manufacturers because it can be created very inexpensively and to very specific design specifications. Many consumers are probably not aware how often they come in contact with this type of marketing. As an example, a small doll, a yo-yo, toy action figure; for each one of these a custom clamshell packaging will be designed, molded and printed to fit each one uniquely.
Unfortunately, blister packaging sometimes gets a bad rap when it comes to its impact on the environment. Frankly, we think that’s unfair. You shouldn’t have to choose between your bottom line and your conscience.
عضو شوید
عضویت سریع
آمار
وب سایت:
آمار مطالب
آمار بازدید
